Quantified Risk Analysis
Online | Face-to-face | In-company
Overview
Learn how to evaluate risk using the Quantified Risk Analysis (QRA) method – the numerical combination of severity of consequence with frequency of event.
This course will help you better understand different types of risk and how they are calculated. You will learn how to select scenarios to be modelled, and how to determine appropriate data as inputs. It will explore how risk results are interpreted and how QRA can be applied to practical engineering solutions. Demonstrations of Occupied Building Risk Assessment and As Low As Reasonably Practicable (ALARP) will be provided. The course will use a mix of theory, practical exercises and discussion.
Learning outcomes
By the end of the course, you will understand:
- the definitions of risk
- how to select cases to be modelled
- how to build a QRA model
- how to calculate risk and interpret the results.
Who will benefit
- Managers, supervisors, engineers, safety personnel and others involved in commissioning and reviewing of QRA studies
- Graduates, chemical and other engineers may find it beneficial in the preparation of the Chartered Member application
What delegates say
"The course was well structured and gave the theory as well as practical examples that demonstrated the theory very well. Helen was an excellent tutor and her comprehensive understanding of the subject was clearly delivered."
L Reddy, CONSUB Switzerland
"Great course material, great exercises. Helen was superb, she knows her stuff and is a great communicator. The pre-course work helped me keep up during the [live] sessions."
A Cotter, Gas Networks Ireland
Course outline
- Introduction to risk
- Definition of scenarios
- Derivation of event frequencies
- Calculation methods for risk
- Occupied Building Risk Assessment
- ALARP demonstration
- QRA limitations and best practice
Upcoming courses
Online
Online courses consist of three live and interactive modules with the trainer. There will also be some work to complete independently before the course and between the live sessions. More details will be provided after you have registered.
From 17 February 2025
- Module 1 – 17 February 2025, 14:00–17:00 GMT
- Module 2 – 20 February 2025, 14:00–17:00 GMT
- Module 3 – 25 February 2025, 14:00–17:00 GMT
Live sessions are delivered via Microsoft Teams. If you don't already have this installed, you can join as a guest in order to access the training.
Face-to-face
- 30 April–1 May 2025, Rugby, UK
Not available then?
Register your interest in alternative dates.
Fees – book early and save 20%
Book any live online or face-to-face training course before 31 January 2025 and SAVE 20%! Simply use discount code EARLY20 at checkout.
- IChemE member – £1,200 + VAT
- Non-member – £1,500 + VAT
Terms and conditions: offer applies to live online or face-to-face course bookings made between 2 December 2024 and 31 January 2025. Applies to both member and non-member prices but cannot be used in conjunction with any other offer eg multi-place discounts. Registration must be confirmed and paid by 31 January 2025.
How to register
Select your preferred course from the list of upcoming start dates and go to the 'Book course' button at the bottom of the page.
More than one person to train?
Multi-place discounts
Discounts are available to companies booking more than one place. Bookings must be made at the same time to receive the discount.
- 2 places – 10% discount
- 3 places –15% discount
- 4 or more places – 20% discount
In-company training
This course can be delivered to corporate teams, either on-site or online. This could be a cost-effective option if you have several people requiring the training. Content can be tailored to your specific requirements. Request a quotation.
Attendance certificate & CPD hours
An e-certificate will be issued at the end of the course to confirm attendance and CPD hours logged. Please note that you must attend all modules to receive the certificate.
CPD hours should be used as an approximate guide and will vary depending on the preferred approach of the delegate and to what extent additional learning is completed.
Associated course
Process Risk Assessment
Learn about risk assessment in the process industries and why it is key to protecting against process safety incidents.
Trainer
Stuart Hunter
Stuart is a safety consultant with over twenty years’ experience of performing a wide range of safety studies for both hydrogen projects and the oil and gas industry, including LNG and high H2S facilities. His experience includes writing COMAH reports, client Safety Cases, vent and dispersion studies, explosion studies, fire studies and QRAs. He has knowledge of onshore and offshore safety legislation relating to the oil and gas industry and experience of using client design guides such as Shell Design and Engineering Practices and TOTAL General Specifications. His experience also includes extensive use of SAIPH, PHAST, Shell FRED, BP Cirrus and FLARESIM, as well of use of PHASTRisk and CFD.